REASONABLE RATES TO SHIP ANYWHERE IN CANADA!!!
REASONABLE RATES TO SHIP ANYWHERE IN CANADA!!!
6' - $3700.00
7' - $3900.00
8' - $4100.00
Drive, hoses, couplers, in-line gauges and mount - $9900.00
$20,000.00
Arguably the best sweeper on the market, pin system for easy adjustment, 2" greasable bearing,direct drive motor, 26" poly/wire bristles, easy bristle change without disconnecting the hydraulic hoses.
GUTTER BRUSH AND WATER KIT OPTIONS!
ON SALE!!
32" BRISTLES!!!!! Direct drive, centering swing linkage, easy wafer exchange, HD storage stands, guarded motor, HD hood, Greasable bearing.
60" - $14,929.00
72" - $15,362.00
84" - $15,760.00
+ HARNESS
Poly, wire & combo available.
$16.00 - $30.00 depending on size and make.
HEAVY DUTY!!!
3/4" Grade 50 steel bottom tines 1/2" Grade 50 steel top tines Fully gusseted frame top and bottom Massive 51" opening to get the job done 2x 3,000 PSI Hydraulic Cylinders for bite Serrated teeth on clam to hold in debris of all kinds
66" - $5600.00
74" - 5800.00
84" - $6000.00
HEAVY DUTY!!!
Greaseable pivot points 1/4“ bucket material available 1/2" fully welded on cutting edge (better for digging) 1/2" bolt-on reversible cutting edge (better for scraping) 1/2″ end plates for bolt-on side to attach 1/2″ thick steel grapple sides 5/16” thick steel grapple flats Twin 3,000 psi hydraulic cylinders 1/2″ x 3” under support straps, depending on bucket thickness
74" - $4770.00
78" $4990.00
84" - $5150.00
HEAVY DUTY!!!
3/4" Grade 50 steel bottom tines 1/2" Grade 50 steel top tines Fully gusseted frame top and bottom Massive 51" opening to get the job done 2x 3,000 PSI Hydraulic Cylinders for bite Serrated teeth on clam to hold in debris of all kinds
74" - 6380.00
84" - $6760.00
HEAVY DUTY!!!
Spacing between tines: 3" Side plate width: 1/2" Steel tine width: 3/8" Grade 50 cutting edge: 1/2"Bolt-on removable side plates Commercial-grade steel Reinforced outside tines Greaseable pivot points Visibility cut outs on grapple, bolt-on cylinder covers
78" - $4800.00
84" - $4900.00
HEAVY DUTY!!!
3/16” material, 5/16” sides, gusseted, 74” opening, 2 1/2" x1/2” under strapping welded into the quick attach, Depth: 38" Height: 36" Opening: 74.5" Claw Thickness: 3/8" North American made! 1320 LBS
84" - $4900.00
HEAVY DUTY!!!
72" - $4900.00
HEAVY DUTY!!!
Bucket Width is 16" tapered down to 12" Length is 63" Height is 20" Cutting Edge 1/2" Grade 50 Steel 3,000 PSI cylinder
$3500.00
Best pipe grapple on the market, 48" and 60" tines, 6000 lb capacity, Nitro steel cylinders.
2-CYLINDER
48" TINES - $8933.00
60" TINES - $9161.00
4-CYLINDER
48" - $11,423.00
60" - $11,651.00
Up to 3" material, direct drive motor, hydraulic braking, vented motor guard, circular flywheel with updraft blades, standard flow 16-25 GPM.
72" STANDARD DECK - $CALL FOR SALE
72" - OPEN FRONT - $SALE
Up to 8" material, CARBIDE TEETH, direct drive motor, hydraulic braking, vented motor guard, circular flywheel with updraft blades.
72" 20-25 GPM - $21,618.00
84" 39-45 GPM - $28,167.00
Efficiently mulch 6-8” diameter trees and quickly cut up to 14” diameter trees. 30-45 GPM
$49,143.00
Compact Digga manufactured gearbox
Digga designed Eaton motor.
2 Piece shaft design ensures maximum side load ratings without increasing load on bearings.
Lifetime shaft pull out warranty
5 year gear box and 3 year motor warranty.
Over 30 years design and manufacturing experience.
4DSS - $4100.00
4DDS - $4900.00 - HIGH FLOW
Compact Digga manufactured gearbox. Digga designed Eaton motor with optional integrated pressure relief valve to eliminate the need for bulky valve blocks and reduce many potential leak points. 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings.
Lifetime shaft pull out warranty
5 year gear box and 3 year motor warranty
Over 30 years design and manufacturing experience
Easily converted to a screw anchor drive with the addition of our patented 'anti kickback valve
$3500.00
Stocking 4" - 36"
All American made bits. TREE BITS TOO
- 4"x4' (Fishtail point only) Fab Head Auger - $458
- 6"x4' (2 Teeth) Fab Head Auger - 2" Hex - $511
- 8" x 4' (2 Teeth) Fab Head Auger - 2" Hex - $721
- 9"x4' (3 Teeth) Fab Head Auger - 2" Hex - $807
- 10"x4' (3 Teeth) Fab Head Auger - 2" Hex - $908
- 12"x4' (4 Teeth) Fab Head Auger - 2" Hex - $943
- 15"x4' (5 Teeth) Fab Head Auger - 2" Hex - $1028
- 16"x4' (5 Teeth) Fab Head Auger - 2" Hex - $1121
- 18"x4' (6 Teeth) Fab Head Auger - 2" Hex - $1213
- 20"x4' (6 Teeth) Fab Head Auger - 2" Hex - $1345
- 24"x4' (8 Teeth) Fab Head Auger - 2" Hex - $1467
- 30"x4' (9 Teeth) Fab Head Auger - 2" Hex - $2020
- 36"x4' (11 Teeth) Fab Head Auger - 2" Hex - $2559
DIRECT DRIVE SYSTEM WITH RELIEF VALVES Eaton® motor provides optimum performance and longevity and allows forward and reverse operation. MANUAL SIDE-SHIFT Allows operator to dig near structures and other objects. ADJUSTABLE AUGER Clears loose soil from the trenching area. Can be removed if not needed. STANDARD CRUMBER Designed to keep the trench bottom clean and smooth. REVERSE CHAIN ROTATION To expel obstructions. Chain tension can also be adjusted quickly. VARIOUS CHAIN CONFIGURATIONS 6, 8, 10 and 12 chain widths. Standard, shark tooth and rock frost chains.
48" X 6" - $13,362.00
Heavy Duty design! For placing material in hard to reach areas.5' or 7' reach (skid-steer) Step for easy access in and out of skid-steer
Wheel loader model available with quick attach lugging
Skid Steer 5' - $2532.00
Skid Steer 7' - $2831.00
SKID STEER, EXCAVATOR AND TRACTOR UNITS!
DML - $35,000.00 AVERAGE
UML - $48,000.00 AVERAGE
Bi-directional, protected direct drive motor....massive hydraulic motor!
$9500.00
CANADIAN MADE! 72" MK Martin skid steer tiller Replaceable Bolt-On Tines, Self Lubricating Chain Drive, Adjustable Skid shoes, Floating Deflector, 16-28 GPM.
$5515.00
Starting at $8500.00
84" - $11,900.00
96" - $12,500.00
+ HARNESS
Commercial Grade Incredibly Tough!!
12″ Wide Heavy Duty Bucket
Replaceable Digger Teeth
Fully gusseted 5/16″ box frame for commercial application
Comes with Thumb for Gripping Debris
$4990.00
90" MONSTER POWER RAKE! 139 teeth, Side Shields, Hydraulic Angle, All Harnesses Available for any machine type for Plug & Play, Fold Up Foam filled Tires 1440 Lbs
$21,380.00 + HARNESS
Only conditioner with tilt option, dual motors, canadian made, mini and full size models. Call for pricing...
72" - $15,500
48" BOBCAT MINI - $10,900.00
Makes leveling uneven ground easy and efficient.
Sturdy construction permits aggressive cutting, while wide blade location allows precise control for a smooth finish.
Two reversible, replaceable bolt-on wear edges.
78" - $7806.00
84" - $8205.00
$1390.00
48" 5500 LB Tines walk through - $1600.00
48" 5500 LB Full Frame - $1690.00
4200 LB CAPACITY - $1500.00
60" 5500 LB Tines Full Frame - $2200.00
72" 5500 LB TINES - $2500.00
V40
72" - $2684.00
84" - $2963.00
V50
72" - $3236.00
78" - $3392.00
84" - $3528.00
CALL FOR PRICING... Stocking HLA, Virnig & Bradco buckets.
1/2″ STEEL RIGGING PLATES AT THE TOP OF BOOM LARGE GUSSET PLATES & TWO PLATES AT THE BASE FLAT FRONT FRAME PREVENTS DAMAGE TO TREES DURING TRANSPORT RIGGING HOLES ON EACH SIDE OF THE FRAME TO SECURE LOADS - 330 LBS
$1857.00
$2346.00
Patented dual-point blade design enables digging and trenching in forward and reverse.
Numerous uses including transplanting trees, digging rocks, trenching, and breaking up compacted soil.
Open design provides excellent visibility and ensures the operator can quickly transplant trees, often without the help of others. 3/8" thick high-carbon steel blade.
26"- $2479.00
30" - $2723.00
36" - $2877.00
Can get other sizes and brands.
18" - $1103
24" - $1143
30" - $1662
36" - $1973
42" - $2788
48" - $3794
37" ROOTBALL 4-SPADE IN STOCK - $26,000.00
$3805.00
Standard Flow 15-30 GPM - $11,300.00
High Flow 31-42 GPM - $11,900.00
MINI TOO! - $9900.00
24" - $4,900.00
36" - $6,500.00
$10,900.00
Please call for pricing and availability.
Mini Breaker SFB250
Call for pricing
36" X 6" - Combo Chain, mini universal and mini Bobcat - $6900.00
Canadian Made!!
$10,900.00
ON SALE!!!!!!
$1090.00 - All Mini Mounts
CALL FOR PRICING - 36", 42" & 48"
In Stock
$9,900.00
4000 Pound Capacity - IN STOCK
$990.00
Designed for wrapped bales, stacking, and placing in wrapper but can be used to just move bales around too.
$3990.00
Single Operator Post Driver
Optional grapple picks up the posts from the ground and pounds without requiring aditional hydraulics or controls.
Unique design eliminates post damage and machine/operator fatigue. Pounds wood and steel posts.
Simple and fast attachment to skid steer. Smooth operation, skid-steer is not bounced around by the hammer motion. Self aligning.
Starting at $8700.00
V50 96" - CALL - I'LL BLOW IT OUT!
IN STOCK
CALL FOR PRICING
THE BEST SNOW BLOWER ON THE MARKET....PERIOD!!!!!!
Virnig V50 Snow Plow - 72" available 16-25 GPM
The paddle-style Auger chews through any type of snow, and the direct drive Parker® motor throws it up to 30 feet.
72" - $13,400.00
84" - $13,900.00
+ HARNESS
FASTTACH BOX ONLY - $4900.00
CALL FOR ULTRA BLADE PRICING
CALL FOR PRICING - I have every size for any machine.
SERIES 100 NON TIRES AND RIMS - $3700.00
STUDDED - $3990.00
SERIES 100 TIRE ONLY - $600.00
VIRNIG V50 SNOW BUCKETS WITH BOLT ON EDGES
84" - $3325.00
96" - $3485.00
101" - $3613.00
OTHER MODELS/SIZES OF VIRNIG AVAILABLE
SNOW BUCKETS WITH BOLT ON EDGES
84" - $2900.00
96" - $3200.00
$5435.00
Heavy Duty Commercial Grade Snow Pusher With Back Drag
7' 2500 - $3600.00
8' 2500 - $3900.00
7' 3500 - $4800.00
8' 3500 - $5300.00
Heavy Duty Commercial Grade Snow Pusher With Back Drag
$6900.00
1/2" Solid - $536.00
1/4" Solid - $359.00
Mini Bobcat - $508.00
Mini Universal - $300.00
ASV Mini - CALL
Use skid steer attachments on your tractor!
It is so much easier to find skid steer attachments than your tractor hookup.
$1990.00
Broken or damaged tines?
Give us a call, we have them in stock and ready to go!
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.